|
|
||||||||
|
First published online August 26, 2005; 10.1104/pp.105.065912 Plant Physiology 139:397-407 (2005) © 2005 American Society of Plant Biologists Evidence for In Vitro Binding of Pectin Side Chains to Cellulose1Institut National de la Recherche Agronomique, Unité de Recherche Biopolymères, Interactions, Assemblages, 44316 Nantes cedex 03, France
Pectins of varying structures were tested for their ability to interact with cellulose in comparison to the well-known adsorption of xyloglucan. Our results reveal that sugar beet (Beta vulgaris) and potato (Solanum tuberosum) pectins, which are rich in neutral sugar side chains, can bind in vitro to cellulose. The extent of binding varies with respect to the nature and structure of the side chains. Additionally, branched arabinans (Br-Arabinans) or debranched arabinans (Deb-Arabinans; isolated from sugar beet) and galactans (isolated from potato) were shown bind to cellulose microfibrils. The adsorption of Br-Arabinan and galactan was lower than that of Deb-Arabinan. The maximum adsorption affinity of Deb-Arabinan to cellulose was comparable to that of xyloglucan. The study of sugar beet and potato alkali-treated cell walls supports the hypothesis of pectin-cellulose interaction. Natural composites enriched in arabinans or galactans and cellulose were recovered. The binding of pectins to cellulose microfibrils may be of considerable significance in the modeling of primary cell walls of plants as well as in the process of cell wall assembly.
The well-known model of primary cell walls (PCWs) of dicotyledons emphasizes noncovalent interactions between cell wall polymers and suggests two independent, but interacting, networks where the cellulose-xyloglucan network is embedded in a matrix of pectic polysaccharides (Carpita and Gibeaut, 1993
Cellulose, the primary structural element of the cell wall, is a homopolymer composed of (1
Xyloglucan is known to interact with cellulose presumably through hydrogen bonds (Hayashi et al., 1987
Although Chanliaud and Gidley (1999) In this work, the in vitro adsorption of pectins of varying structures to Avicel microcrystalline cellulose was studied and compared to the well-known adsorption of xyloglucan. Some polymers that exhibited a clear adsorption to Avicel cellulose were also tested for their ability to bind to PCW cellulose. We provide evidence for molecular interactions between cellulose microfibrils and pectins, presumably through the arabinan and/or galactan side chains. Alkali treatment of sugar beet and potato cell wall materials (CWM) were performed with the aim of providing further evidence of potential pectin-cellulose interactions.
Some Pectins and Pectic Subunits Are Able to Bind to Cellulose Microfibrils Xyloglucan, commercial and laboratory-extracted pectins, and commercial pectic neutral sugar side chains were tested for their ability to bind to Avicel microcrystalline cellulose. The chemical and physicochemical characteristics of these polysaccharides are presented in Table I. Solutions of the various polysaccharides were prepared at different concentrations and aliquots were mixed with a known quantity of cellulose. Polysaccharide solutions and polysaccharide-cellulose blends were kept under continuous head-over-tail mixing at 40°C for 6 h, centrifuged, and the supernatants were tested for their GalUA or total neutral sugar content by colorimetric assays. The amount of adsorbed matter was calculated from the difference in sugar content measured for polysaccharide solutions and polysaccharide-cellulose blend supernatants. The binding capacity of the different polymers to cellulose was then expressed by binding isotherms where the mass of bound material per mass of cellulose (qe) was plotted versus the concentration of free material remaining in solution at equilibrium concentration (Ce).
The amount of xyloglucan from Tamarindus indica adsorbed to cellulose (Fig. 1) is in good agreement with values reported by Vincken et al. (1995)
The same experiment was performed with commercial citrus pectins of DM 30 (C-30) and 70 (C-70), composed mainly of GalUA (820 mg/g and 770 mg/g for C-30 and C-70, respectively; Table I). These pectins do not bind to cellulose (Fig. 1), in agreement with results reported by Chanliaud and Gidley (1999)
Xyloglucan and the arabinan-rich pectin, the two polysaccharides that exhibited the higher adsorption to Avicel cellulose, were tested for their ability to bind to PCW cellulose (Fig. 2). A very important binding capacity of xyloglucan to PCW cellulose was observed. A maximum binding capacity of xyloglucan to PCW cellulose of approximately 33 µg/mg of cellulose was reached above 750 µg/mL of xyloglucan, showing that PCW cellulose can adsorb about 3 times more xyloglucan than Avicel cellulose. Moreover, the steep part of the isotherm, suggesting the presence of specific interactions between xyloglucan and cellulose, was shown for a wider range of concentrations (up to 50 µg/mL and up to 10 µg/mL for PCW cellulose and Avicel cellulose, respectively; Figs. 1 and 2). A higher binding capacity to PCW cellulose was also shown for the arabinan-rich pectin (Fig. 2). The amount of pectin adsorbed to cellulose increased with increasing concentration and a plateau value of approximately 8 µg/mg of cellulose was reached above 500 µg/mL of pectin. The PCW cellulose appeared able to adsorb about 2 times more arabinan-rich pectin than the Avicel cellulose. These findings emphasize the influence of cellulose origin in binding processes, in agreement with results reported by Hayashi et al. (1987)
Commercial side chains of branched arabinans (Br-Arabinans) and debranched arabinans (Deb-Arabinans) isolated from sugar beet, and commercial galactan side chains isolated from potato, were used in binding experiments with Avicel cellulose in order to confirm the assumption that binding to cellulose could possibly take place through the pectic side chains. Arabinans were composed mainly of Ara (681 mg/g and 518 mg/g for Br-Arabinan and Deb-Arabinan, respectively) with minor amounts of Gal, Rha, and GalUA (Table I). Galactan contained essentially Gal (608 mg/g), with residual amounts of Ara, Rha, and GalUA (Table I). The binding capacity of these polysaccharides to cellulose varied with respect to their nature and structure, as shown in Figure 3. Galactan and Br-Arabinan displayed binding capacities to cellulose comparable to that of arabinan- and galactan-rich pectins. The amount of each polysaccharide adsorbed to cellulose increased with increasing concentrations and the saturation effect of the cellulose surface was observed between 750 µg/mL and 1,000 µg/mL of polysaccharide, where the maximum of material adsorbed was approximately 5 µg/mg of cellulose. The most significant binding was measured for Deb-Arabinan (Fig. 3). For concentrations above 750 µg/mL, the amount of bound Deb-Arabinan reached a plateau value of approximately 11 µg/mg of cellulose. The maximum binding capacity of Deb-Arabinan to cellulose was close to that of xyloglucan. Significant differences were observed, however, at the beginning of the isotherm where the initial amount of Deb-Arabinan adsorbed to cellulose was lower than that of xyloglucan. Mishima et al. (1998) -D-(1 4)-linked glucans and suggested interaction mechanisms based on surface complementarity. Deb-Arabinans were recently shown to adopt a 2-fold helix conformation with a pitch of 0.868 nm (Janaswamy and Chandrasekaran, 2005
Binding Strength of Xyloglucan, Pectins, and Pectic Side Chains to Avicel Microcrystalline Cellulose The reversibility of the composites obtained by the in vitro adsorption of xyloglucan-, arabinan-, and galactan-rich pectins, and isolated neutral sugar side chains to Avicel cellulose, was appraised. The incubation of the xyloglucan-Avicel cellulose composite with sodium acetate buffer revealed that the adsorption of xyloglucan to cellulose is irreversible in such conditions because no xyloglucan could be removed. The adsorption of pectins to Avicel cellulose was slightly weaker because approximately 5% of arabinan-rich and approximately 8% of galactan-rich pectins bound to Avicel cellulose were pulled from their surfaces after incubation with sodium acetate buffer. The binding of the Br-Arabinans and Deb-Arabinans and the galactan side chains to cellulose appeared quite strong because only approximately 2% of bound material was removed under the conditions used. The adsorption of xyloglucan to cellulose, however, appears stronger than that of pectins or pectic domains to cellulose. The better surface complementarity between xyloglucan and cellulose suggested above could explain the observed irreversibility of the xyloglucan-cellulose composite.
The kinetics of binding to cellulose was studied for a low concentration (50 µg/mL) of xyloglucan and Deb-Arabinan. Two kinetic behaviors were observed: (1) Xyloglucan binding increased sharply for the first 15 min to reach a value of approximately 2.25 µg of xyloglucan bound per milligram of cellulose (Fig. 4); and (2) Deb-Arabinan binding occurred almost instantaneously and a binding capacity of approximately 0.7 µg of Deb-Arabinan per milligram of cellulose was reached within 5 min (Fig. 4). These differences in the initial binding rates of xyloglucan and Deb-Arabinan to cellulose are probably due to the huge difference with respect to weight-average molar mass for these two polysaccharides (Table I). Indeed, the best binding conformation is reached more slowly by a large macromolecule like xyloglucan (763 kD) than by a small one like Deb-Arabinan (26 kD). Once this conformation reached above 5 min and 15 min for Deb-Arabinan and xyloglucan, respectively, binding increases smoothly for both polymers and reaches an apparent plateau value at 4 to 6 h (Fig. 4) in agreement with the findings of Hayashi et al. (1987)
Isolation of Natural Composites Interactions between pectins and cellulose were also studied in sugar beet and potato cell walls. The CWMs were treated in various alkaline conditions and the chemical composition of the residues was determined in order to look for the presence of pectic populations differing in their binding capacity to cellulose.
Ara (225 mg/g), GalUA (225 mg/g), and Glc (237 mg/g) are the three main sugars detected in the untreated sugar beet CWM (Table II). This composition suggests that the major polysaccharides in these cell walls are arabinan-rich pectins and cellulose. The total amount of noncellulosic Glc, Xyl, and Fuc (34 mg/g) indicates a very low xyloglucan content, as previously reported by Renard and Jarvis (1999)
The same treatments were applied to potato CWM and comparable results were obtained. The untreated potato CWM was mainly composed of galactan-rich pectins and cellulose (Table III). The total amount of noncellulosic Glc, Xyl, and Fuc (62 mg/g) indicates a low xyloglucan content. About 11% of the potato CWM was extracted by weak alkali conditions (0.05 N NaOH at 4°C) to give a galactan-rich pectin, which was shown to form weak associations with cellulose under in vitro conditions (compare with binding assays). The potato CWM, however, was still rich in pectins and cellulose with some hemicelluloses (Table III). After alkaline treatments of increasing severity, remaining CWMs were progressively enriched in cellulosic Glc, pectic and hemicellulosic polymers being more and more washed off. High amounts of hemicelluloses (56% to 70% of the noncellulosic Glc and 45% to 59% of the Xyl initially present in CWM) and some remaining pectic substances (2% to 8% of the Gal and 2% to 6% of the GalUA initially present in CWM) were still present in those residues. As previously suggested for sugar beet CWM, the potential pectin-cellulose interaction in potato CWM is most likely weaker than the xyloglucan-cellulose interaction.
In this work, the binding ability of pectins or pectic domains of varying structures to cellulose was studied and compared to the well-known adsorption of xyloglucan to cellulose. It is shown that pectins can bind in vitro to cellulose microfibrils, probably through their neutral sugar side chains. The arabinan- and galactan-rich pectins bind to cellulose microfibrils, in contrast to commercial pectins, which are almost free of side chains. The extent of binding varies with respect to the nature and structure of the side chains, the adsorption level of Deb-Arabinan being comparable to that of xyloglucan and higher than that of Br-Arabinan and galactan. Our findings also emphasize that binding is modulated by the cellulose origin. PCW-derived cellulose appeared capable of binding much higher amounts of xyloglucan- and arabinan-rich pectin than Avicel microcrystalline cellulose. These differences in binding ability are most likely due to differences both in cellulose surface availability and crystallinity index (Hayashi et al., 1987
The weight ratios of xyloglucan adsorbed in vitro to cellulose (1.3% and 3.3% [w/w] for Avicel cellulose and PCW cellulose, respectively) are in good agreement with the results of Hayashi et al. (1987)
In contrast, there is very little information about the way in which pectic polysaccharides could interact with cellulose. Our results reveal that side chain-rich pectins and isolated arabinan and galactan side chains can bind to cellulose under in vitro conditions. It is likely that interactions between pectic side chains and cellulose are also mediated by hydrogen bonds, as suggested for xyloglucan. The branching of arabinan and galactan chains seems to be a limiting factor in the binding capacity, probably because of the steric hindrance of the substituants. Deb-Arabinan chains led to an increased binding capacity that could be due to a higher degree of alignment of arabinan backbone with cellulose microfibrils. The possibility of multilayer formation by self-association of Deb-Arabinan must also be taken into account, especially because steps were observed in the binding isotherm. As shown for xyloglucan, arabinans and galactans could be more tightly bound to cellulose in vivo. Alkali treatments applied to sugar beet and potato CWM revealed that several pectic populations could exist. Pectins that can be easily solubilized for smooth alkaline conditions could constitute a putative pectic population weakly associated with cellulose microfibrils. These pectins were indeed shown to interact only slightly with cellulose microfibrils under in vitro conditions. Another putative pectic population seems to be more tightly bound to cellulose microfibrils because it withstands extraction in more severe alkaline conditions. These findings are in good agreement with data from the literature. Indeed, Oechslin et al. (2003)
Pectic populations, and particularly their arabinan or galactan side chains, that are highly mobile are likely to contribute to the cell wall porosity as plasticizers and water-binding agents. Jones et al. (2003)
Pectic side chains are also thought to be involved in cell and tissue development. Distinct locations in relation to cell development of arabinan and galactan have been observed at the carrot root apex and in suspension-cultured cells (Willats et al., 1999
Very little information is available on the biosynthesis of pectins and their side chains. Immunochemistry, using antibodies directed against cell wall polysaccharide epitopes (Moore et al., 1991 The observed binding of pectins to cellulose microfibrils may be of considerable significance in the modeling of PCWs of plants and in the process of cell wall assembly. The pectic network could interact with the cellulose-xyloglucan network through pectic neutral sugar side chains. The role of the fine structure of arabinan and galactan will be further studied in order to elucidate the properties of these pectin-cellulose complexes.
CWM, Cellulose, and Noncellulosic Polysaccharides
Sugar beet (Beta vulgaris) CWM was prepared from fresh sugar beet pulp (approximately 2 kg; sugar factory in Cagny, France) by boiling in 5 L of 75% (w/v) ethanol for 20 min. This operation was carried out three times. The slurry was filtered through nylon cloth and the insoluble material was left for 12 h with 75% (w/v) ethanol (5 L) and filtered again. This step was repeated until the filtrate gave a negative reaction to the phenol sulfuric acid test (Dubois et al., 1956
The PCW cellulose was prepared from sugar beet CWM as described by Heux et al. (1999) Avicel microcrystalline cellulose PH-101 was purchased from Fluka. Xyloglucan was extracted from a powder of tamarind seeds (Dainippon Pharmaceutical). The powder was boiled with citric acid (2 g/L) for 40 min, centrifuged, and the clean supernatant was concentrated under vacuum at 40°C. Xyloglucan was obtained by precipitation with 1 volume of 95% (w/v) ethanol. After 1 night at 4°C, the precipitate was treated by solvent exchange (ethanol, acetone) and dried overnight at 40°C. Commercial C-30 and C-70 citrus pectins were from Danisco. The arabinan- and galactan-rich pectins were isolated from sugar beet and potato CWM, respectively. The sugar beet (5 g) and potato (4 g) CWMs were stirred with 150 mL of 0.05 N NaOH at 4°C for 30 min. The extractions were carried out three times. After filtration through G3 sintered glasses, supernatants were pooled, adjusted to pH 5 with 1 N HCl, concentrated under vacuum at 40°C, and precipitated with 4 volumes of 95% (w/v) ethanol. After 1 night at 4°C, precipitates were carefully rinsed with 70% (w/v) ethanol and solubilized in water. Solutions were concentrated under vacuum and freeze dried. Br-Arabinan and Deb-Arabinans (from sugar beet) and galactan (from potato) were purchased from Megazyme.
The sugar beet (5 g) and potato (4 g) CWMs were stirred with 150 mL of 0.05 N, 0.275 N, or 0.5 N NaOH at 40°C, 65°C, or 90°C for 1 h. The extraction was carried out three times. The final residues were recovered after filtration through G3 sintered glass, abundantly washed with distilled water, dried by solvent exchange (ethanol, acetone), and left overnight at 40°C.
Binding assays were performed in 20 mM sodium acetate buffer (pH 5.8) at 40°C. Solutions of the different polysaccharides were prepared at 1 mg/mL, eventually heated to give perfectly cleared solutions, and diluted to give a range of concentration from approximately 2.5 µg/mL to approximately 1 mg/mL. After centrifugation (15 min at 4,000g), supernatants were recovered and aliquots (1.5 mL) were added to cellulose samples (approximately 7.5 mg). Polysaccharide solutions and polysaccharide-cellulose blends were incubated for 6 h at 40°C (head-over-tail mixing), then centrifuged for 10 min at 9,000g, and supernatants (1,250 µL) were removed for analysis. GalUA and/or neutral sugar content were quantified in the polysaccharide solutions and in the polysaccharide-cellulose blend supernatants using the automated colorimetric m-hydroxybiphenyl and/or orcinol methods, respectively (Thibault, 1979
Polysaccharide-cellulose blends obtained after incubation, centrifugation, and removal of 1,250 µL of supernatant were suspended in 1,250 µL of sodium acetate buffer (pH 5.8). After incubation (24 h at 40°C, head-over-tail mixing), samples were centrifuged for 10 min at 9,000g and supernatants were analyzed for their sugar content as described above. The amount of desorbed polymer was calculated, taking into account the quantity of soluble polymer that was still present in the pellet.
Kinetic experiments were performed for xyloglucan and Deb-Arabinan for a concentration of 50 µg/mL. Polysaccharide-cellulose blends were prepared as described above (binding assays) and incubated for 5 to 360 min at 40°C with head-over-tail mixing. Samples were either centrifuged for 10 min at 9,000g or, for short incubation times (5, 10, and 15 min), immediately filtered through a Maxi clean IC-4 (Altech) resin. The amount of polymer adsorbed was calculated colorimetrically as described above.
Uronic acid (as GalUA) and total neutral sugar (as Ara or Gal) content were determined colorimetrically by the automated m-hydroxybiphenyl and orcinol methods, respectively (Thibault, 1979 The individual neutral sugars were analyzed as their alditol acetate derivatives by gas chromatography after hydrolysis by 4 N H2SO4 at 100°C for 2 h for arabinans and galactans, 3 h for xyloglucan, and 6 h for pectic samples. Longer hydrolysis times were applied to pectic samples in order to provide a good estimation of Rha content. Avicel microcrystalline cellulose, sugar beet CWM, potato CWM, and potato and sugar beet residues were hydrolyzed by 4 N H2SO4 at 100°C for 2 h. Cellulosic Glc was measured as the difference in Glc content with and without prehydrolysis by 72% (w/v) H2SO4 for 90 min at 25°C. Inositol was used as an internal standard.
Methanol and acetic acid were released by alkaline de-esterification in the presence of CuSO4 and quantified by HPLC on a C18 column as previously described (Levigne et al., 2002 Anion-exchange chromatography was performed on a DEAE Sepharose CL-6B column (30x2.6 cm; Pharmacia). Samples were applied onto the column equilibrated with 50 mM sodium succinate buffer (pH 4.5) at a flow rate of 1.5 mL/min. The column was first eluted with 370 mL of 50 mM sodium succinate buffer (pH 4.5). NaCl gradient (00.6 M NaCl) was then applied. Fractions of 12 mL were collected and analyzed colorimetrically for their content of total neutral sugars and GalUA. The molar mass distribution and polydispersity index were determined by viscometric or light-scattering detection after high-performance size exclusion chromatography. The system used was composed of one Shodex SB-G precolumn followed by two Shodex OH-pak SB HQ 805 and 804 columns in series with a multiangle laser light-scattering detector (MALLS, mini Dawn; Wyatt), a differential refractometer (ERC 7517 A), and a differential viscometer (T-50A; Viscotek). Elution was performed with 50 mM NaNO3 containing 0.02% NaN3 at a flow rate of 0.7 mL/min at room temperature. The system was calibrated using pullulan standards. The molar mass determined by viscometric detection was calculated through universal calibration.
The authors wish to thank Audrey Chimen for assistance in extraction experiments. We are also grateful to Roquette, Danisco, Dainippon Pharmaceutical, and the Cagny sugar factory for providing the samples. Received May 19, 2005; returned for revision June 23, 2005; accepted June 29, 2005.
1 This work was supported by the Institut National de la Recherche Agronomique/Pays de la Loire. Article, publication date, and citation information can be found at www.plantphysiol.org/cgi/doi/10.1104/pp.105.065912. * Corresponding author; e-mail ralet{at}nantes.inra.fr; fax 33240675084.
Bootten TJ, Harris PJ, Melton LD, Newman RH (2004) Solid-state 13C-NMR spectroscopy shows that the xyloglucans in the primary cell walls of mung bean (Vigna radiata L.) occur in different domains: a new model for xyloglucan-cellulose interactions in the cell wall. J Exp Bot 55: 571583 Carpita NC, Gibeaut DM (1993) Structural models of primary cell walls in flowering plants: consistency of molecular structure with the physical properties of walls during growth. Plant J 3: 130[CrossRef][ISI][Medline] Chanliaud E, Gidley MJ (1999) In vitro synthesis and properties of pectin/Acetobacter xylinus cellulose composites. Plant J 20: 2535[CrossRef][ISI][Medline] Dubois M, Gilles KA, Hamilton JK, Rebers PA, Smith F (1956) Colorimetric method for determination of sugars and related substances. Anal Chem 28: 350356[CrossRef]
Fleischer A, O'Neill MA, Ehwald R (1999) The pore size of non-graminaceous cell walls is rapidly decreased by borate ester cross-linking of the pectic polysaccharide rhamnogalacturonan II. Plant Physiol 121: 829838
Fry SC (1989) The structure and functions of xyloglucan. J Exp Bot 40: 111 Gross KC, Sams CE (1984) Changes in cell wall neutral sugar composition during fruit ripening: a species survey. Phytochemistry 23: 24572461[CrossRef]
Hayashi T, Maclachlan G (1984) Pea xyloglucan and cellulose. I. Macromolecular organization. Plant Physiol 75: 596604
Hayashi T, Marsden MPF, Delmar DP (1987) Pea xyloglucan and cellulose. V. Xyloglucan-cellulose interactions in vitro and in vivo. Plant Physiol 83: 384389 Heux L, Dinand E, Vignon MR (1999) Structural aspects in ultrathin cellulose microfibrils followed by 13C CP-MAS NMR. Carbohydr Polym 40: 115124[CrossRef] Ishii T, Tobita T (1993) Structural characterization of feruloyl oligosaccharides from spinach leaf cell walls. Carbohydr Res 248: 179190[Medline] Iwai H, Ishii T, Satoh S (2001) Absence of arabinan in the side chains of the pectic polysaccharides strongly associated with cell walls of Nicotiana plumbaginifolia non-organogenic callus with loosely attached constituent cells. Planta 213: 907915[ISI][Medline] Janaswamy S, Chandrasekaran R (2005) Polysaccharide structures from powder diffraction data: molecular models of arabinan. Carbohydr Res 340: 835839[Medline]
Jones L, Milne JL, Ashford D, McQueen-Mason SJ (2003) Cell wall arabinan is essential for guard cell function. Proc Natl Acad Sci USA 100: 1178311788 Le Goff A, Renard CMGC, Bonnin E, Thibault J-F (2001) Extraction, purification and chemical characterization of xylogalacturonans from pea hulls. Carbohydr Polym 45: 325334[CrossRef] Levigne S, Thomas M, Ralet MC, Quemener B, Thibault JF (2002) Determination of the degrees of methylation and acetylation of pectin using C18 column and internal standards. Food Hydrocoll 16: 547550 Levy S, York WS, Stuike-Prill R, Meyer B, Staehelin LA (1991) Simulations of the static and dynamic molecular conformations of xyloglucan. The role of the fucosylated sidechain in surface-specific sidechain folding. Plant J 1: 195215[ISI][Medline] McNeil M, Darvill AG, Fry SC, Albersheim P (1984) Structure and function of the primary cell walls of plants. Annu Rev Biochem 53: 625663[CrossRef][ISI][Medline] Mishima T, Hisamatsu M, York WS, Teranishi K, Yamada T (1998) Adhesion of beta-D-glucans to cellulose. Carbohydr Res 308: 389395[CrossRef]
Moore PJ, Swords KMM, Lynch MA, Staehelin LA (1991) Spatial organization of the assembly pathways of glycoproteins and complex polysaccharides in the Golgi apparatus of plants. J Cell Biol 112: 589602 Oechslin R, Lutz MV, Amado R (2003) Pectic substances isolated from apple cellulosic residue: structural characterisation of a new type of rhamnogalacturonan I. Carbohydr Polym 51: 301310[CrossRef] O'Neill MA, Albersheim P, Darvill A (1990) The pectic polysaccharides of primary cell walls. In DM Dey, ed, Methods in Plant Biochemistry. Academic Press, London, pp 415441 Pauly M, Albersheim P, Darvill A, York WS (1999) Molecular domains of the cellulose/xyloglucan network in the cell walls of higher plants. Plant J 20: 629639[CrossRef][ISI][Medline] Ralet M-C, Bonnin E, Thibault J-F (2001) Pectins. In E Vandamme, ed, Biopolymers. Wiley-VCH Verlag, Weinhein, Germany, pp 345380 Ralet M-C, Crépeau M-J, Buchhlot H-C, Thibault J-F (2003) Polyelectrolyte behavior and calcium binding properties of sugar beet pectins differing in their degrees of methylation and acetylation. Biochem Eng J 16: 191201 Ralet M-C, Thibault J-F, Faulds CB, Williamson G (1994) Isolation and purification of feruloylated oligosaccharides from cell walls of sugar-beet pulp. Carbohydr Res 263: 227241[Medline] Renard CMGC, Crépeau M-J, Thibault J-F (1995) Structure of the repeating units in the rhamnogalacturonic backbone of apple, beet and citrus pectins. Carbohydr Res 275: 155165[CrossRef]
Renard CMGC, Jarvis MC (1999) A cross-polarization, magic-angle spinning, 13C-nuclear-magnetic-resonance study of polysaccharides in sugar beet cell walls. Plant Physiol 119: 13151322 Ridley BL, O'Neill MA, Mohnen D (2001) Pectins: structure, biosynthesis, and oligogalacturonide-related signaling. Phytochemistry 57: 929967[CrossRef][ISI][Medline]
Rose JKC, Hadfield KA, Labavitch JM, Bennett AB (1998) Temporal sequence of cell wall disassembly in rapidly ripening melon fruit. Plant Physiol 117: 345361 Saulnier L, Thibault J-F (1999) Ferulic acid and diferulic acids as components of sugar-beet pectins and maize bran heteroxylans. J Sci Food Agric 79: 396402[CrossRef] Schols HA, Voragen AGJ (1994) Occurrence of pectic hairy regions in various plant cell wall materials and their degradability by rhamnogalacturonase. Carbohydr Res 256: 8395[CrossRef]
Somerville C, Bauer S, Brininstool G, Facette M, Hamann T, Milne J, Osborne E, Paredez A, Persson S, Raab T, et al (2004) Toward a systems approach to understanding plant cell walls. Science 306: 22062211 Sugiyama J, Vuong R, Chanzy H (1991) Electron diffraction study on the two crystalline phases occurring in native cellulose from an algal cell wall. Macromolecules 24: 41684175[CrossRef] Thibault J-F (1979) Automatisation du dosage des substances pectiques par la méthode au métahydroxydiphényle. Lebensm-Wiss Technol 12: 247251 Thibault J-F, Rinaudo M (1986) Chain association of pectic molecules during calcium-induced gelation. Biopolymers 25: 455468[CrossRef] Tollier MT, Robin JP (1979) Adaptation de la méthode à l'orcinol sulfurique au dosage automatique des glucides neutres totaux: conditions d'application aux extraits d'origine végétale. Ann Technol Agric 28: 115 Vignon MR, Heux L, Malainine ME, Mahrouz M (2004) Arabinan-cellulose composite in Opuntia ficus-indica prickly pear spines. Carbohydr Res 339: 123131[CrossRef][ISI][Medline] Vincken JP, Keizer A, Beldman G, Voragen AGJ (1995) Fractionation of xyloglucan fragments and their interaction with cellulose. Plant Physiol 108: 15791585[Abstract] Voragen AGJ, Pilnik W, Thibault J-F, Axelos MAV, Renard CMGC (1995) Pectins. In AM Stephen, ed, Food Polysaccharides and Their Applications. Marcel Dekker, New York, pp 287339 Whitney SEC, Brigham JE, Darke AH, Reid JSG, Gidley MJ (1995) In vitro assembly of cellulose/xyloglucan networks: ultrastructural and molecular aspects. Plant J 8: 491504 Willats WGT, Steele-King CG, Marcus SE, Knox JP (1999) Side chains of pectic polysaccharides are regulated in relation to cell proliferation and cell differentiation. Plant J 20: 619628[CrossRef][ISI][Medline] This article has been cited by other articles:
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||